Kwikset Locksmith in Englewood, IL

Smart locksSmart locks
House lockoutsHouse lockouts
Re-keyingRe-keying
Deadbolt upgradesDeadbolt upgrades
SchlageSchlage
KwiksetKwikset
Car keys & fobsCar keys & fobs
Every visit starts with

Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch

You get a price before we start. It does not change when we arrive. No surprises.

Get your free estimate

Kwikset Locksmith in Englewood, IL | Valor Locksmith

Our Kwikset services in Englewood mean working on hardware that’s been through Chicago winters and turnover after turnover. We service, rekey, repair, and install Kwikset locks across the 60621 ZIP code, and the reason our work here tends to go differently is simple: most Englewood calls involve vacant two- and three-flats where a new owner just closed and the old landlord’s mixed hardware needs to be brought under one key. If you’ve got a dead Kwikset SmartCode keypad, a seized deadbolt, or a building full of mismatched knobs, call us at (877) 870-5926. We’re an independent shop. Kwikset doesn’t own us, authorize us, or pay us. Our only job is making your locks work.

Call (877) 870-5926

Why Englewood Residents Choose Us for Kwikset Service

Kwikset is the most common brand we see on Englewood’s two- and three-flats, though we also provide Kwikset service in Auburn Gresham. That means we carry the parts that matter: genuine Kwikset cylinders, keypads, latch bolts, and SmartCode components. A lot of locksmiths can swap a deadbolt. Fewer can diagnose a Kevo touch-to-open sensor that’s been dead for two years or match a new Kwikset 660 cylinder to an existing mortise lock on a 1920s greystone. That’s the work we do every week.

Neil Broderick, our owner, grew up in Bridgeport and learned the trade through the vocational program at Kennedy-King College on the South Side. He’s been running service calls across this city for the better part of two decades, and the Englewood calls have their own rhythm: landlord turnarounds, vacant buildings, renters locked out of a unit where the buzzer hasn’t worked in years. We know what’s behind these doors before we arrive.

We use OEM-compatible parts where they’re the right call, and we tell you clearly when they aren’t. You won’t get a mystery cylinder off the back of a van. You’ll get a straight answer and a lock that works when we leave.

Explore

Styles & brands we work with

House lockouts
House lockouts
Re-keying
Re-keying
Deadbolt upgrades
Deadbolt upgrades
Smart locks
Smart locks
Schlage
Schlage
Kwikset
Kwikset
Car keys & fobs
Car keys & fobs

Common Kwikset Locksmith Problems We Solve in Englewood

  • SmartCode 913 / 914 keypad deadbolts that go dark. A dead battery pack is the usual culprit, but on Englewood’s exterior steel doors we often find corroded contact plates after a winter of freeze-thaw. The keypad shorts out and the tenant can’t get in. We stock replacement keypads and battery packs for both models.
  • Kwikset 660 / 665 deadbolts that seize or snap in swollen jambs. Early-1900s brick two-flats and greystones shift with the seasons. When temps drop below freezing, wooden door frames in Englewood swell and the bolt binds. We’ve pulled plenty of snapped 665 bolts out of doors near 63rd and Halsted. Repair means re-prepping the jamb, not just forcing a new bolt into the same bad hole.
  • Kevo touch-to-open sensors that stop responding. Years of road salt, grit, and grime work into the capacitive ring on the Kevo. The sensor stops reading touches and the owner is stuck fumbling for a physical key they may not carry. Sometimes a factory reset brings it back. Sometimes the unit needs replacing. We’ll tell you which one before you spend a dime.
  • Builder-grade Tylo and Polo knob sets that spin or never fully throw. These are everywhere on Englewood’s rehabbed two-flats. A prior turnover repair often strips the spindle or cross-bores the door wrong. The knob turns but the latch doesn’t catch. We see this on rear entries constantly. Replacement is usually the honest answer.
  • Mismatched Kwikset hardware after landlord turnover. A building changes hands, and the new owner finds a Kwikset knob on the rear door, a deadbolt on the front, and an original mortise lock on the side entry. One door uses one key, another uses something else. We rekey the whole building to a single key and replace what’s beyond saving.

Kwikset Service in Englewood: What Local Conditions Mean for Your Equipment

Here’s what shapes Kwikset work in Englewood more than anything else: the volume of vacant and foreclosed two- and three-flats means the same building gets rekeyed over and over, each time by someone new. A landlord buys a brick two-flat off 63rd, changes one lock, rents it out, loses it to foreclosure, and the next owner shows up to find a Kwikset SmartCode 914 on the front entry, a Kwikset Tylo knob on the rear, and an original mortise lock on the side door that nobody’s touched since the building went up. Our job is to sort through that mess quickly, bring every entry under one key, and replace the hardware that’s been poorly repaired into failure. We’re not doing a simple suburban lock swap here, unlike Kwikset in New City. We’re untangling years of partial fixes on doors that have shifted with every freeze-thaw cycle since before most of the people on the block were born.

We’re routinely rekeying a building’s front and rear entries within weeks of the last turnover. We pull into Englewood, and the new owner is standing there with a ring of keys from the previous landlord, hoping one of them fits something. That’s a normal Tuesday. And the winter piece makes it worse: when a vacant building’s heat goes off, the wooden doors swell and contract hard. Deadbolts seize. Keypads die faster. The work takes more patience and more parts.

Kwikset Models & Products We Service in Englewood

We work on the full range of Kwikset hardware in Englewood, but these are the models we see most on this neighborhood’s buildings:

  • SmartCode 913 and 914 keypad deadbolts – battery replacement, keypad repair, rekeying, and full replacement.
  • Kevo 2nd-gen smart locks – sensor diagnosis, fob reprogramming, cylinder rekeying, and honest replacement advice when the unit’s past saving.
  • 660 and 665 single-cylinder deadbolts – bolt replacement, strike reinforcement, rekeying, and new installation.
  • Tylo and Polo knob-and-deadbolt combos – the builder-grade sets on Englewood’s rehabbed two-flats. Spindle repair, latch replacement, or full swap when the housing is cracked.

We stock genuine Kwikset cylinders, keypads, and latch bolts for the SmartCode and Kevo lines. When OEM parts are discontinued or back-ordered, we use quality aftermarket cylinders and tell you exactly which one is going in your door. On older Kwikset knob-and-deadbolt sets, we repair when the cylinder and bolt are sound and recommend replacement when the housing is cracked or the door prep is already compromised.

Kwikset Service Pricing in Englewood

What you’ll pay for Kwikset service in Englewood depends on what we find when we get there. Here’s what drives the cost:

  • Rekeying a Kwikset cylinder – typically $19 to $35 per cylinder, plus a service call. On a two-flat with three entry doors, most jobs land between $120 and $220 total.
  • Deadbolt installation – supply and installation of a new Kwikset 660 or 665 usually runs $95 to $165 per door, including the hardware, depending on whether the existing prep is sound or needs re-drilling.
  • SmartCode or Kevo repair – diagnosing a dead keypad, replacing a battery pack or contact plate, or swapping a Kevo sensor generally costs $45 to $90 in labor, plus parts if the unit needs replacing.
  • Emergency lockout – getting a tenant or owner back into a Kwikset-secured building on short notice typically runs $75 to $150, depending on time of day and what kind of hardware is on the door.

Every quote we give on the phone is the price on the invoice. No dispatch fee added when the van shows up. No bait pricing. You’ll hear the full number before anyone rolls out. For an exact quote on your Kwikset job in Englewood, call (877) 870-5926. Estimates are free.

Serving Englewood, IL — Our Local Coverage Area

We’re based in the Englewood area and know this community well, and we also offer Greater Grand Crossing Kwikset service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Kwikset Locksmith in Englewood

Service Areas Near Englewood

We run Kwikset service throughout Englewood and into the neighborhoods around it. Ashburn, Chatham, and West Englewood are regular stops. We also cover parts of the South Side and work with owners and landlords across the city. For the full Englewood service area, see our coverage page. If you’re further north, we handle Kwikset service in Lincoln Park and Kwikset service in West Englewood as well.

Book Your Kwikset Service in Englewood Today

If you’ve got a dead keypad, a seized deadbolt, or a building full of mismatched Kwikset hardware, call (877) 870-5926. We’ll get you on the schedule and give you a straight quote before anyone leaves the shop. Same-day service is available for most Englewood jobs. Show up, solve it, move on.

Written by Neil Broderick, Owner at Valor Locksmith, serving Englewood and the South Side for nearly two decades.

Need Locksmith help in Englewood? Licensed & insured · 60-minute response · free estimates
Call (877) 870-5926
Areas We Serve

Request a Free Estimate in Englewood

Tell us what you need — Valor Locksmith responds fast. No obligation.

When you send us your details, you acknowledge our Privacy Policy and consent to receive communications through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch